Advertisement
Sync Switch
+6V D.C.
~
Main Switch
Tape recorder
.
0-
<,
-
.
-
'----0
Start Switch
Recording System (DIN System)
For example, the pulse generator 'Synvoton
1-4' should be used with the Volland 'SRP' and
'SV 2209' connecting cords and a Philips'
'2209AV' tape recorder. Press the camera's
shutter release lever after setting the tape record-
er to recording mode. When the tape recorder
start switch, which is coupled to the shutter
lever, is set to ON and the tape recorder starts,
voice is recorded on 1 and 2 tracks of the tape.
The one pulse per frame signal from the camera
is converted to a one pulse per four frames signal
by the 'Synvoton 1-4' and recorded on track 4
of the.tape. If you withdraw your hand from the
.shutter
.
release lever, the tape recorder also
stops.
*
The 18 fps. filming speed is used.
The 8 pin (DIN) jack on your
814XL-E
2209AV
D
ITIIJ
00
lipe Recorder
MIC
Caution: Do not short pins 3 and 4
44
I
.
Advertisement
