Table of Contents
Advertisement
Main Menu
Table of Contents
Instrument Panel Indicators
Turn Signal and
Hazard Warning
Indicators
The left or right turn signal indicator
blinks when you signal a lane change
or turn. If an indicator does not blink
or blinks rapidly, it usually means
one of the turn signal bulbs is
burned out (see pages
199
Replace the bulb as soon as possible,
since other drivers cannot see that
you are signaling.
When you press the hazard warning
button, both turn signal indicators
and all turn signals on the outside of
the vehicle flash.
60
''Daytime Running
Lights'' Indicator
If this indicator comes on when the
ignition switch is turned to the ON
(II) position and the parking brake is
released, it means there is a problem
in the high beam headlight's circuit.
Have your vehicle checked by your
and
200
).
dealer.
High Beam Indicator
This indicator comes on with the
high beam headlights. For more
information, see page
This indicator also comes on with
reduced brightness when the
daytime running lights (DRL) are on
(see page
73
.
74
).
Lights On Indicator
This indicator reminds you that the
exterior lights are on. It comes on
when the light switch is in either the
or
position. If you turn the
ignition switch to the ACCESSORY
(I) or LOCK (0) position without
turning off the light switch, this
indicator will stay on. A reminder
chime will also sound when you open
the driver's door.
Trunk-open Indicator
This indicator comes on if the trunk
lid is not closed tightly.
Door-open Indicator
This indicator comes on if any door
is not closed tightly.
Advertisement
Chapters
Table of Contents
