Download  Print this page

Makita 6010B Instruction Manual

Hide thumbs
   

Advertisement

Drill
MODEL 6010B
MODEL 6010BVR
I N S T R U C T I O N
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
DOUBLE
INSULATION
M A N U A L
004617

Advertisement

loading

  Also See for Makita 6010B

  Related Manuals for Makita 6010B

  Summary of Contents for Makita 6010B

  • Page 1 Drill MODEL 6010B MODEL 6010BVR 004617 DOUBLE INSULATION I N S T R U C T I O N M A N U A L WARNING: For your personal safety, READ and UNDERSTAND before using. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
  • Page 2: Specifications

    • Note: Specifications may differ from country to country. END201-1 SYMBOLS For Model 6010B The following show the symbols used for the tool. Be For European countries only sure that you understand their meaning before use. Noise and Vibration ....Read instruction manual.
  • Page 3: Safety Instructions

    SAFETY INSTRUCTIONS ENA001-2 WARNING: When using electric tools, basic safety precautions, including the following, should always be followed to reduce the risk of fire, electric shock and personal injury. Read all these instructions before operating this product and save these instructions. For safe operations: tion and changing accessories.
  • Page 4 ADDITIONAL SAFETY RULES FOR TOOL ENB001-1 Hold tool by insulated gripping surfaces when Hold the tool firmly. performing an operation where the cutting tools Keep hands away from rotating parts. may contact hidden wiring or its own cord. Con- Do not leave the tool running. Operate the tool tact with a “live”...
  • Page 5: Functional Description

    Before plugging in the tool, always check to see that the switch trigger actuates properly and returns to the “OFF” position when released. For 6010B To start the tool, simply pull the switch trigger. Release the switch trigger to stop.
  • Page 6: Operation

    ASSEMBLY CAUTION: • Always be sure that the tool is switched off and unplugged before carrying out any work on the tool. Installing or removing drill bit For tool with standard keyed chuck 004643 To install the bit, place it in the chuck as far as it will go. Tighten the chuck by hand.
  • Page 7: Maintenance

    CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose.
  • Page 8 Makita Corporation 883384D9...

This manual is also suitable for:

6010bvr