Table of Contents
Advertisement
INSTALLATION
1
1. Stopper Pin
1
1. Bolt
FUNCTIONAL
DESCRIPTION
2
1. Battery cartridge
2. Button
8
Bench mounting
When the tool is shipped, the handle is locked in the lowered
002193
position by the stopper pin. Release the stopper pin by lower-
ing the handle slightly and pulling the stopper pin.
This tool should be bolted with two bolts to a level and stable
002194
surface using the bolt holes provided in the tool's base. This
will help prevent tipping and possible injury.
CAUTION:
•
Always be sure that the tool is switched off and the
battery cartridge is removed before adjusting or
checking function on the tool.
Installing or removing battery cartridge
002240
1
•
Always switch off the tool before insertion or removal of
the battery cartridge.
•
To remove the battery cartridge, withdraw it from the tool
while pressing the buttons on both sides of the cartridge.
•
To insert the battery cartridge, align the tongue on the
battery cartridge with the groove in the housing and slip
it into place. Always insert it all the way until it locks in
place with a little click. If not, it may accidentally fall out
of the tool, causing injury to you or someone around you.
•
Do not use force when inserting the battery cartridge. If
the cartridge does not slide in easily, it is not being
inserted correctly.
Hide quick links:
Advertisement
Table of Contents
