Table of Contents
Advertisement
Specific Safety Rules
1.
Hold tool by insulated gripping surfaces when performing an operation where
the cutting tool may contact hidden wiring. Contact w i t h a "live" wire
will
make exposed metal parts of the tool "live" and shock the operator.
2.
Be aware that this tool is always in an operating condition, because
it
does
not have t o be plugged into an electrical outlet.
3.
Avoid cutting nails. Inspect workpiece for any nails and remove them before
operation.
4. Do not c u t oversize workpiece.
5.
Check for the proper clearance beyond the workpiece before cutting so that
6.
Hold the tool firmly.
7.
Make sure the blade is not contacting the workpiece before the switch is
8.
Keep hands away from moving parts.
9.
Always switch o f f and wait for the blade t o come t o a complete stop before
IO.
Do
not touch the blade or the workpiece immediately after operation; they
the blade will not strike the floor, workbench, etc.
turned on.
removing the blade from the workpiece.
may be extremely hot and could burn your skin.
SAVE THESE INSTRUCTIONS.
4
Advertisement
Table of Contents
