Advertisement
Removing or installing the saw blade
CAUTIO
N:
Always be sure that the tool is switched off and the battery cartridge is removed before
installing or removing the blade.
To remove the blade, press the shaft lock
so that the blade cannot revolve and use
the hex wrench to loosen the bolt counter-
clockwise. Then remove the bolt, outer
flange and blade.
To install the blade, follow the removal pro-
cedure in reverse
BE SURE TO TIGHTEN THE BOLT
SECURELY.
Bolt
\
CAUTl ON :
*Be sure the blade is installed with teeth pointing up
a t
the front of the tool.
*Use only the Makita hex wrench to install or remove the blade.
Hex wrench storage
When not in use, the hex wrench can be
conveniently stored.
Hex wrench
I
\
13
Advertisement
