Related Manuals for Makita 5603R
Summary of Contents for Makita 5603R
- Page 1 INSTRUCTION MANUAL Circular Saw 5603R 5703R 5705R 5903R 5103R 5143R 005391 DOUBLE INSULATION IMPORTANT: Read Before Using.
-
Page 2: Specifications
) : 88 dB(A) wood while in firm contact with the workpiece. With Sound power level (L ) : 99 dB(A) appropriate Makita genuine saw blades, other materials Uncertainty (K) : 3 dB(A) can also be sawed. Model 5703R, 5705R, 5903R... -
Page 3: General Power Tool Safety Warnings
Makita Uncertainty (K) : 1.5 m/s machine(s): Designation of Machine: Model 5103R, 5143R Circular Saw Model No./ Type: 5603R, 5703R, 5705R, 5903R, 5103R, Work mode : cutting wood 5143R Vibration emission (a ) : 2.5 m/s or less are of series production and Uncertainty (K) : 1.5 m/s... - Page 4 Do not operate power tools in explosive 14. Remove any adjusting key or wrench before atmospheres, such as in the presence of turning the power tool on. A wrench or a key left flammable liquids, gases or dust. Power tools attached to a rotating part of the power tool may create sparks which may ignite the dust or fumes.
-
Page 5: Circular Saw Safety Warnings
26. Follow instruction lubricating Kickback causes and related warnings changing accessories. − kickback is a sudden reaction to a pinched, bound or 27. Keep handles dry, clean and free from oil and misaligned saw blade, causing an uncontrolled saw to grease. - Page 6 with the retracting handle and make sure it moves freely and does not touch the blade or any other part, in all angles and depths of cut. 19. Check the operation of the lower guard spring. If the guard and the spring are not operating properly, they must be serviced before use.
- Page 7 Additional safety warnings 28. Use extra caution when cutting damp wood, pressure treated lumber, or wood containing knots. Maintain smooth advancement of tool without decrease in blade speed to avoid overheating the blade tips. 29. Do not attempt to remove cut material when blade is moving.
-
Page 8: Functional Description
45° angle cuts or the 60° notch for 60° angle cuts. 005393 Riving knife adjustment For model 5603R, 5703R,5705R, 5903R, 5103R Loosen the clamping screws in front and back, and tilt the 1. Setting tool to the desired angle for bevel cuts (0° - 45°). Secure... - Page 9 Be sure the blade is installed with teeth pointing up • 2. Switch trigger at the front of the tool. Use only the Makita wrench to install or remove the • blade. Never depress the shaft lock while the saw is •...
-
Page 10: Operation
Rip fence (Guide rule) 005403 To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed by Makita Authorized Service Centers, always using Makita replacement parts. 005402 The handy rip fence allows you to do extra-accurate... -
Page 11: Optional Accessories
Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita Service Center. Saw blades • Rip fence (Guide rule) • Hex wrench •... - Page 12 Makita Corporation Anjo, Aichi, Japan www.makita.com 884364K224...