Table of Contents
Advertisement
Specifying Movie Image Quality (
Procedure
Enter the REC Mode * [MENU] * "Quality" Tab * » Quality (Movie)
Movie image quality is a standard that determines the detail, smoothness, and clarity
of a movie during playback. Shooting with the high-definition movie (FHD) setting will
result in better image quality, but it also shortens the amount of time you can shoot.
Image Quality
(Pixels)
FHD
1920
1080
x
STD
640
480
x
• The 16:9 aspect ratio is available when "FHD" is selected as the image quality.
• Memory capacity (Movie recording time you can shoot) will be affected by the
quality settings you configure (page 121).
Correcting Image Brightness (EV Shift)
Procedure
Enter the REC Mode * [MENU] * "Quality" Tab * EV Shift
You can manually adjust an image's exposure value (EV value) before shooting it.
• Exposure Compensation Range: –2.0 EV to +2.0 EV
• Unit: 1/3 EV
1.
Use [8] and [2] to adjust the exposure compensation value.
[8] : Increases the EV value. A higher EV
value is best for light-colored subjects
and backlit subjects.
[2] : Decreases the EV value. A lower EV
value is best for dark-color subjects and
for shooting outdoors on a clear day.
To cancel exposure compensation, change the EV value to 0.0.
2.
Press [SET].
This applies the exposure compensation value. The exposure compensation
value you set remains in effect until you change it or turn off the camera (which
causes it to revert to "0.0").
REC Screen
Approximate Data
Icon Display
Rate
16.6 Megabits/second 30 frames/second
8.4 Megabits/second
56
Quality (Movie))
»
Frame Rate
30 frames/second
Advanced Settings
Advertisement
Table of Contents
