Removal Of Casing - Jede QUATTRO Service Manual

7.5 Removal of casing

To remove the machine's upper casings
do the following:
1. Open the front of the machine and turn
until the slip joint can be lifted out of
its track.
2. Remove the screws (1) from the front
side of the machine (figure 27).
3. Remove the screws (3) from the back
side of the machine (figure 28).
4. Lift the casing upward.
To loosen the machine's lower casing, do the
following:
1. Remove the machine's upper casings.
2. Remove the screw (2) from the front
side of the machine (figure 27).
3. Remove the screws (4) from the back
side of the machine (figure 28).
4. Push the lower casing forward (figure
29) so that it is released from its
keyhole (5).
Rev. A
2012-09-10
Prior to beginning subsequent
service, the machine's plug
must always be removed from
the wall socket.
When reassembling, ensure that
the screws come into the correct
thread by twisting them somewhat
counter-clockwise. This is done
so as not to cut up the existing
threads. D
C
B
A
1
6 5
6 5
Figure 27
3
4
4
Figure 28
5
Figure 29
Service manual
4
QUATTRO
1
2
3
4
3
Designed by Checked by
BerntsM
22
3