Change Of Loading Schedule; Menu Panel - Jede QUATTRO Service Manual

5.2 Change of loading schedule

As previously stated, the machine has 3 different loading schedules for 6 different
drinks. This means that the drink strength and flavour can be varied according to
personal preferences.
To change from the preset loading schedule (1) to another, do as
follows:
1. Turn off the power to the machine (use the switch on the
back).
2. Wait approx. 5 sec. (until the green LED has extinguished).
3. Hold in the desired drink button (1-3) for the desired
loading schedule (figure 14).
4. Turn on the power to the machine without letting go of
the drink button.
5. When the red LED light is lit, release the drink button.
6. The red LED blinks 1 to 3 times to indicate the loading
schedule that has been chosen.
7. The change of the loading schedule is now complete.

5.3 Menu panel

By holding in buttons 1-5, respectively button 6 (hot water) you can change the
drink's properties. The green LED blinks quickly during app. 5 seconds, then
slowly. The following apply to these choices:
• Buttons 1-5:
• Button 6:
Observe that the above choices via menu panel only apply
for one dispensing. The machine returns to the selected
loading schedule after the drink has been delivered.
Rev. A
2012-09-10
If any drink button is held in until the green LED blinks
slowly and is released during this period, then the coffe
strength is reduced for drinks 1-4 and the chocolate's
strength for drink 5.
Observe that the green LED first blinks slowly.
If the drink button is released directly after pressing, then
the tea water will be dispensed according to the loading
schedule (14 cl.).
If the drink button is kept pressed in then the tea water
is dispensed until the button is released.
QUATTRO
1
2
3
Figure 14
4
Service manual