Table of Contents
Advertisement
4. Troubleshooting
Fig.4-1
Fig.4-2
Fig.4-3
Fig.4-4
DocNo.800-0401 - Troubleshooting - RDW6012 dishwasher
Resolving Minor Problems Yourself
Experience has shown that you can resolve most problems
that occur during normal daily usage yourself, without having
to call out a service engineer. Not only does this save costs
but it also means that the dishwasher is available to use. The
following list of common occurrences and their remedies
should help you identify the causes of most problems.
Problems When the Unit is Switched On
Dishwasher does not start up
•
Fault with fuse in mains electricity supply.
•
Plug not inserted in wall socket.
•
Dishwasher door not closed properly.
•
Program button has not been pressed.
•
Water tap not turned on.
•
Blocked filters.
•
Blocked strainer in water intake hose.
CAUTION!
n
n
Remember that repairs should only be carried out by
a suitably qualified specialist. Improper repairs can
lead to considerable equipment damage as well as
danger to the user.
Problems With the Dishwasher
Error display on the program display
When the program display displays 'F1' (Fig.4-1) this means
there is a risk of water overflow. Turn off the water tap and
contact the nearest authorized service centre.
When the program display displays 'F2' (Fig.4-2) this
means that the waste water within the machine cannot be
discharged. Check if:
•
The filters within the dishwasher are clogged;
•
The drain hose is crimped or bent;
•
The drain hose is clogged.
If after checking the above the problem continues, contact
the nearest authorized service centre.
When the program display displays 'F3' (Fig.4-3) this means
that the flow of water into the dishwasher cannot be
stoppped. Turn off the water tap and contact the nearest
authorized service centre.
When the program display displays 'F5' (Fig.4-4) this means
that there is not enough water for the dishwasher to operate
correctly.
Check if:
•
The water is turned on and the hose is connected
properly;
•
The water supply to the house is on and has sufficient
pressure;
•
The water supply hose is crimped or bent;
•
The filter for the water supply hose is clogged.
17
Advertisement
Table of Contents
