uuIndicatorsu
Indicator
Name
M (sequential
*2
mode)
Indicator/
*3
Sequential
Mode Gear
Selection
Indicator
Seat Belt
Reminder
Indicator
*1:On the left: Models with full color display
On the right: Models without full color display
*2:Models with full color display
*3:Models without full color display
78
On/Blinking
Comes on when the manual
●
sequential mode is applied.
Comes on and the beeper
●
sounds if you are not wearing
a seat belt when you set the
power mode to ON.
If the front passenger is not
●
wearing a seat belt, the
indicator comes on about a
few seconds later.
Blinks while driving if either
●
you or the front passenger
has not fastened a seat belt.
The beeper sounds and the
indicator blinks at regular
intervals.
Explanation
2 Sequential Shift Mode Operation
P. 341
The beeper stops and the indicator goes off
●
when you and the front passenger fasten
their seat belts.
Stays on after you or the front
●
passenger has fastened the seat belt -
A detection error may have occurred in the
sensor. Have your vehicle checked by a
dealer.
2 Seat Belt Reminder P. 33
I n f o r ma t i o n P r o v i d e d b y :
Message
*1
—
—