uuIndicatorsu
Indicator
Name
Malfunction
Indicator Lamp
Charging
System
Indicator
*1:On the left: Models with full color display
On the right: Models without full color display
74
On/Blinking
Comes on when you set the
●
power mode to ON, and goes
off either when the engine
starts or after several seconds
if the engine is not started. If
"readiness codes" have not
been set, it blinks five times
before it goes off.
Comes on if there is a
●
problem with the emissions
control system.
Blinks when a misfire in the
●
engine's cylinders is detected.
Comes on when you set the
●
power mode to ON, and goes
off when the engine starts.
Comes on when the battery is
●
not charging.
Explanation
Readiness codes are part of the on board
●
diagnostics for the emissions control
systems.
2 Testing of Readiness Codes P. 527
Comes on while driving - Have your
●
vehicle checked by a dealer.
Blinks while driving - Stop in a safe place
●
where there are no flammable objects. Stop
the engine for 10 minutes or more, and
wait for it to cool down. Then, take the
vehicle to a dealer.
2 If the Malfunction Indicator Lamp
Comes On or Blinks P. 506
Comes on while driving - Turn off the
●
climate control system and rear defogger in
order to reduce electricity consumption.
2 If the Charging System Indicator
Comes On P. 505
I n f o r ma t i o n P r o v i d e d b y :
Message
*1