Brake Fluid; Refilling Window Washer Fluid - Acura 2015 TLX Quick Reference Manual

uuMaintenance Under the HooduBrake Fluid

Brake Fluid

Specified fluid: Acura Heavy Duty Brake Fluid DOT 3
■
Checking the Brake Fluid
Brake Reservoir
MAX
MIN

Refilling Window Washer Fluid

Check the amount of window washer fluid by looking at the reservoir.
Pour the washer fluid carefully. Do not overflow the reservoir.
446
The fluid level should be between the MIN
and MAX marks on the side of the reservoir.
If the level is low, fill the washer reservoir.
Canadian models
If the washer fluid is low, a message appears
on the multi-information display.
I n f o r ma t i o n P r o v i d e d b y :
1Brake Fluid
NOTICE
Brake fluid marked DOT 5 is not compatible with your
vehicle's braking system and can cause extensive
damage.
If the specified brake fluid is not available, you should
use only DOT 3 or DOT 4 fluid from a sealed
container as a temporary replacement.
Using any non-Acura brake fluid can cause corrosion
and decrease the longevity of the system. Have the
brake system flushed and refilled with Acura Heavy
Duty Brake Fluid DOT 3 as soon as possible.
If the brake fluid level is at or below the MIN mark,
have a dealer inspect for leaks or worn brake pads as
soon as possible.
1Refilling Window Washer Fluid
NOTICE
Do not use engine antifreeze or a vinegar/water
solution in the windshield washer reservoir.
Antifreeze can damage your vehicle's paint. A
vinegar/water solution can damage the windshield
washer pump.