Table of Contents
Advertisement
uuWhen DrivinguAdaptive Cruise Control (ACC) with Low Speed Follow (LSF)
■
To Set the Vehicle Speed
On when ACC with LSF
begins
When driving at about 25 mph (40 km/h) or above: Take your foot off the
pedal and press down the RES/+/SET/– switch when you reach the desired speed.
The moment you release the switch, the set speed is fixed, and ACC with LSF begins.
When driving at slower than about 25 mph (40 km/h): If the vehicle is moving
and the brake pedal is not depressed, pressing the switch fixes the set speed to
about 25 mph (40 km/h) regardless of current vehicle speed. If the vehicle is
stationary, you can set the vehicle speed even with the brake pedal depressed.
Set Vehicle Distance
Set Vehicle Speed
* Not available on all models
354
RES/+/SET/− Switch
Press down and release
When ACC with LSF starts operating, the
vehicle icon, distance bars and set speed
appear on the multi-information display.
I n f o r ma t i o n P r o v i d e d b y :
*
1Adaptive Cruise Control (ACC) with Low Speed Follow (LSF)
When the MAIN button is pressed, ACC with LSF and
Lane Keeping Assist System (LKAS) are both turned on
or off.
ACC with LSF may not work properly under certain
conditions.
2 ACC with LSF Conditions and Limitations
P. 357
When not using ACC with LSF: Turn off adaptive
cruise by pressing the MAIN button. This also will
turn off the Lane Keeping Assist System (LKAS).
*
Advertisement
Chapters
Table of Contents
