Steam Control - Kalorik USK STP 23783 User Manual

When changing the setting from a higher selection to a lower
•
setting allow several minutes for the pressing plate to cool
sufficiently after making the change.
Kind of textile
Nylon
Silk
Rayon
Wool
Cotton
Linen
NOTE: You may find it more efficient to arrange your fabrics from
those requiring the lowest setting to those requiring the highest
setting and proceed accordingly. This will avoid any unnecessary
delay or wait for the pressing plate to cool.

STEAM CONTROL

Steam is produced only when the yellow steam ready light is on.
•
Steam is available only when the temperature of the pressing
•
plate reaches 302°F or 150°C.
The green ready light goes off when the unit has reached the
•
desired temperature. The yellow steam ready light will come on
when the unit is ready to produce steam.
If this is the first time you are using the steam press or you have
•
been storing it for some time, lift the pressing plate into the raised
position and press the burst of steam button several times until the
steam begins to flow.
The burst of steam function can only be used when the steam
•
ready light is on AND the steam press is in a slightly opened
position. Do not use the burn of steam function when the steam
press is closed, or you may damage the unit.
Do not press the burst of steam button for more than 5 seconds or
•
water may drip on your garment.
Temperature
100°C / 212°F
130°C / 266°F
140°C / 284°F
160°C / 320°F
200°C / 392°F
210°C / 410°F
6
Steam
NO
NO
NO
YES
YES
YES
USK STP 23783 - 080302