Safety Features; Troubleshooting - Kalorik USK STP 23783 User Manual

touching the hot metal surfaces or leaving your hand in the bursts
of steam.
Once the pressing plate has cooled down you can clean the
•
surface with a damp cloth. DO NOT use any abrasives on the
pressing plate. This pressing plate has a non-stick coating that will
assist in cleaning.
The ironing board cover is removable for normal washing. You
•
can rinse the ironing board cover with mild detergent and warm
water.

SAFETY FEATURES

The multiple function safety features of this appliance turn off electric
power to the heater when the pressing plate has been left against
the ironing board for about 10 seconds. You will hear a warning
beep. If the pressing plate is left in the open (up) position without use
after approximately 15 minutes, the unit will be automatically shut-
off. In either case, to restore the unit, you have to press "ON/OFF"
again.
TROUBLE SHOOTING
PROBLEM
Steam press cannot
be opened with the
handle
Steam press
becomes warm but
DOES NOT remove
wrinkles.
Press DOES NOT get
warm.
CAUSE
Locking knob is in
locked position
Temperature setting
is not high enough for
the fabric
attempted.
Temperature has not
been selected
Press is not plugged
into an outlet.
9
SOLUTION
Turn the locking knob
to the unlocked
position
Gradually increase
the temperature until
obtaining the desired
results.
Make a proper
selection.
Plug the appliance
in.
USK STP 23783 - 080302