Kenwood DNX4150BT Instruction Manual page 54

Function bar
The functions of each key are as follows.
[E] [F]
Tunes in a ensemble, service, and component. The seek mode switching can be changed. See
Function panel (P.53).
[ ]
Selects the method of searching from preset stations selecting or channel searching. For details on
Selecting Operation
search operation, see
[ ]
Change the Replay mode. See
Function panel
1
Touch on the left side of the screen.
The functions of each key are as follows.
[TI]
Sets the traffic information mode on. For details, see
[SEEK]
Switches the seek mode in the following sequence; [AUTO1], [AUTO2], [MANUAL].
• AUTO1: Tunes in a ensemble with good reception automatically.
• AUTO2: Tunes in ensemble in memory one after another.
• MANUAL: Switches to the next ensemble manually.
[PTY]
Searches a program by setting program type. For details, see
[DLS]
Display the Dynamic Label Segment screen.
(P.55).
Replay (P.57).
Traffic Information
Return to the Top page
(P.56).
Search by program type
Radio Operation
(P.56).
53