Kenwood DNX4150BT Instruction Manual page 75

Return to the Top page
Setting Up
User interface
You can setup user interface parameters.
1
Touch [User Interface] in the list.
User Interface screen appears.
2
Set each item as follows.
Beep
Turns the key touch tone on or off.
Default is "ON".
Language
Select the language used for the control
screen and setting items. See
(P.75).
Text Scroll
Allows scrolling of text display on the source
control screen. Select from "Auto"/"Once"/"OFF".
Auto (Default): Scrolls the text automatically.
Once: Allows you to scroll the text only once
automatically when updated.
OFF: Does not scroll the text automatically.
Drawer Close
Sets whether to close the common menu
(P.14)
automatically. Default is "Auto".
74 74
Language setup
TEL Key Longer than 1 Second
You can set the operation performed when
the TEL key is pressed for 1 second. Select from
"Voice"/"V.OFF"/"R-CAM".
Voice (Default): Displays the Voice Recognition
screen. (P.70).
V.OFF: Turn the display off.
R-CAM: Switches to the rear view camera
video display.
Animation
Sets whether to display animation. Default is "ON".
Secondary
Sets whether to display the navigation
information in the audio screen or vice versa.
Default is "ON".
Steering Remote Controller
Sets the desired function in the steering remote
Learning function of steering
controller. See
remote (P.75).
Travel Prayer for Safe Drive
Sets the prayer for driving safety is displayed
when the unit is turned on, then Quran is played.
Travel Prayer for Safe Drive Setting
See
(P.76).
DEMO
Set the demonstration mode. Default is "ON".