Introduction - Argo EMIX Operating Instructions Manual

Introduction

Emix is the innovative indoor unit in the iSeries system range, able to provide domestic hot water from a thermody-
namic source all year round, i.e. independently of the system's operating mode.
Emix and Emix tank are two components of the iSeries system which are added to the very broad range of indoor units.
The purpose of Emix and Emix tank is to produce domestic hot water through storage, using the energy produced
directly from the heat pump (therefore renewable energy) and providing the service at the same time as heating and
cooling the environments, thanks to the various air and/or hydronic indoor units of the iSeries range.
Emix and Emix tank differ by type of installation which they are allocated, but not by type of service or performance;
they both make hot water up to thermodynamic 80°C when the heat pump is in both heating and cooling mode, without
priority cycles or temporary interruption of the cooling service.
Application examples and operation description
It connects to any
electric bolier
H O
2
H O
2
It connects to any natural
circulation solar tank suitable
for domestic hot water
It connects to any tank suitable
H O
2
H O
2
It connects to any forced
circulation solar tank suitable
dashed: components supplied by third parties
5
for domestic hot water
for domestic hot water
EG