Table of Contents
Advertisement
11.
Auxiliary panel connector (20-2 pin AUX_PANEL1)
This connector is for additional front panel features including front panel SMB, locator
LED and switch, and LAN LEDs.
1.
Front panel SMB (10-2 pin FPSMB)
These connectors are for the front panel SMBus cable.
2.
LAN activity LED (2-pin LAN1_LINKACTLED, LAN2_LINKACTLED)
These connectors are for Gigabit LAN activity LEDs on the front panel.
3.
Locator LED (2-pin LOCATORLED1, LOCATORLED2)
These connectors are for the locator LED1 and LED2 on the front panel. Connect
the Locator LED cables to these 2-pin connector. The LEDs will light up when the
Locator button is pressed.
4.
Locator Button/Switch (2-pin LOCATORBTN#)
These connectors are for the locator button on the front panel. This button queries
the state of the system locator.
4-16
Chapter 4: Motherboard information
Advertisement
Table of Contents
