Table of Contents
Advertisement
4.
Place a SATA/SAS hard disk drive on
the tray, and then secure it with four
screws.
5.
Carefully insert the drive tray and push
it all the way to the depth of the bay until
just a small fraction of the tray edge
protrudes.
When installed, the SATA/SAS connector on the drive connects to the SATA/SAS interface
on the backplane.
6.
Push the tray lever until it clicks, and
secures the drive tray in place. The drive
tray is correctly placed when its front
edge aligns with the bay edge.
7.
Repeat steps 1 to 6 if you wish to install
a second SATA/SAS drive.
ASUS TS500-E8-PS4
2-19
Advertisement
Table of Contents
