Removing A Headlamp; Horizontal Aim Adjustment; Changing A Bulb - Ford 2016 TRANSIT Owner's Manual

5. Locate the vertical adjuster on each
headlamp. Use a suitable tool, for
example a screwdriver or hexagonal
socket, to turn the adjuster clockwise
or counterclockwise to adjust the
vertical aim of the headlamp. The
horizontal edge of the brighter light
should touch the horizontal reference
line.
6. Close the hood and switch off the
lamps.

Horizontal Aim Adjustment

The horizontal aim of the headlamp beam
on your vehicle is not adjustable.

REMOVING A HEADLAMP

WARNING
Switch all of the lamps and the
ignition off. Failure to follow this
warning could result in serious
personal injury.
1. Open the hood. See Opening and
Closing the Hood (page 207).
E169198
2. Remove the screws.
Transit (TTH) Canada/United States of America, enUSA, First Printing
Maintenance
E169199
3. Pull the headlamp toward the front of
your vehicle to disengage it from its
locating points and then lift the
headlamp up.
E169200
4. Disconnect the electrical connectors.
Note: When you install the headlamp, make
sure that you correctly attach the electrical
connector.
Note: When you install the headlamp, make
sure that you correctly engage its locating
points.

CHANGING A BULB

Switch all of the lamps and the
ignition off. Failure to follow this
warning could result in serious
personal injury.
225
WARNINGS