Page 1
The Electrolux Group. The world’s No. 1 choice The Electrolux Group is the world’s largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are sold each year to a value of approx.
A. General Description 1) ENGINE 14) FUEL TANK CAP 2) SHAFT 15) MUFFLER SHIELD 3) THROTTLE TRIGGER 16) ENGINE/SHAFT JOINT 4) GRIP ADJUSTMENT KNOB 17) DELTA HANDLE 5) RIGHT CONTROL HANDLE 18) REAR CONTROL GRIP 6) BLADE 19) SAFETY GUARD 7) NYLON STRING HEAD 20) SAFETY LEVER 8) STOP SWITCH...
Page 5
CAUTION! Danger of serious leg injuries. Maximum shaft speed. Take scrupulous care to follow the instructions in the manual. CAUTION! Danger of kickback. The blade is The cutting parts and muffler may capable of amputating arms and get very hot and cause burns. Wait legs.
Page 6
be projected dangerously at a distance. • Do not use the machine under extreme Contact between the blades and any weather conditions such as very low extraneous objects could cause serious injury temperatures or in a very hot, damp climate. to the operator or other people or animals in •...
Page 7
legs. The force of the kickback can cause the CAUTION! We recommend the use of operator to lose control of the machine. original accessories and Kickback can also occur when cutting with any replacements, which can be type of blade in the hazardous zone (see N1); we purchased from authorized therefore recommend cutting using the distributors.
Page 8
Safety pole guard CAUTION! Fire hazard. Never use the CAUTION! Never use a brush cutter machine with a defective or damaged without its safety pole guard muffler. correctly in place. CAUTION! Engine exhaust fumes are This device, fastened to the machine, ensures a toxic.
Page 9
• Fill the tank in a well-ventilated place. CAUTION! The muffler gets very hot • Place the machine on a solid flat surface so during use and remains hot for some that it cannot tip over, with the cap on the tank time after switching off the engine.
Page 10
• F4. Make sure the hole in the blade is perfectly CAUTION! WE RECOMMEND THE coupled with the centering collar on the upper USE OF ORIGINAL ACCESSORIES plate. Tighten by turning counterclockwise. As AND REPLACEMENTS, WHICH CAN you tighten, hold the blade-plate assembly still BE PURCHASED FROM by inserting the wrench or screwdriver supplied AUTHORIZED DISTRIBUTORS.
accelerate, automatically the enrichment lever CAUTION! Grip the knob of the will return to its original position. starter with one hand and hold the machine in a stable position with the CAUTION! The cutting devices are other. (Take care not to wind the now rotating.
L4. Spark plug maintenance and cleaning of the inside. This will Periodically (at least every 50 hours) remove reduce the possibility of unexpected problems and clean the spark plug and set the space and will ensure the good performance and long between the electrodes (0.5/0.6 mm).
Page 13
Cutting and trimming grass borders with the CAUTION! Do not use worn or nylon string head damaged cutting devices. CAUTION! For nylon string heads, use only strings made of flexible material recommended by the CAUTION! Try to limit contact and manufacturer.
Take care that the cup supporting the blade just N1. CAUTION! WE RECOMMEND grazes the ground. This will prevent the blade THE USE OF ORIGINAL from touching the ground. ACCESSORIES AND REPLACEMENTS; THESE CAN BE FOUND AT YOUR OFFICIAL DISTRIBUTOR'S. THE USE OF ACCESSORIES AND REPLACEMENTS THAT ARE NOT ORIGINAL INCREASES THE...