BenQ SW Series User Manual page 43

Item
Color Temp. 5000K
6500K
9300K
User Define
Adjusts the tone luminance.
Gamma
Color
Adobe RGB
Gamut
sRGB
(not available
when
Color
Rec. 709
is set
Mode
(SW2700PT
to
Adobe
only)
, ,
RGB sRGB
DCI-P3
, or
B+W
(SW2700PT
)
Calibration
only)
Adjusts the degree of how we perceive colors.
Hue
Some color gradations may not be displayed well if this the setting has been
adjusted.
Function
Applies a color tint (cool or warm) to the image. Color
temperature is measured in K (Kelvin) degrees. The
display becomes reddish if the color temperature is
low, and becomes bluish if the color temperature is
high.
Some color gradations may not be displayed well if this the
setting has been adjusted.
The blend of the Red, Green and Blue primary colors
can be altered to change the color tint of the image.
Go to the succeeding
menus to change the settings.
Decreasing one or more of the colors will reduce their
respective influence on the color tint of the image. (e.g.
if you reduce the Blue level the image will gradually
take on a yellowish tint. If you reduce Green, the image
will become a magenta tint.)
Suitable for Adobe® RGB compatible peripherals.
Suitable for sRGB compatible peripherals.
For better color matching representation with
Standard Rec. 709.
For better color matching representation with
Standard DCI-P3.
(red), (green), and
R G
Range
•
R Gain
(0~100)
(blue)
B
•
G Gain
(0~100)
•
B Gain
(0~100)
•
1.6
•
1.8
•
2.0
•
2.2
• 2.4
•
2.6
•
R
•
G
•
B
•
C
•
M
•
Y
Navigating the main menu 43