Sony CA-FB70 Operating Instructions Manual page 38

u INTERCOM connector (XLR 5-
pin)
Used for input and output of intercom
audio signals if an XLR 5-pin headset is
connected.
For information on pin assignment, see
"INTERCOM" in "Pin assignment" on page 52.
v PROMPTER connector (BNC)
For output of the VBS prompter signal
when a CCU is connected.
w DC OUT connector (4-pin,
female)
Supplies power to external devices
such as script lights. (Up to 1.5 A)
For information on pin assignment, see "DC
OUT" in "Pin assignment" on page 52.
x CCU connector (optical multi-
fiber connector)
Connects the adaptor to the HXCU-
FB70 HD Camera Control Unit. When
you use an optical composite cable for
connection, power supply, all camera
signals, such as control signal, video
signal and audio signal, can be
transmitted. When you use only single-
mode optical fiber cable for connection,
all signals (except power supply) can be
transmitted by a pair of optical fiber
cables.
For information on pin assignment, see "CCU"
in "Pin assignment" on page 53.
38 Names and Functions of Parts