Sony CA-FB70 Operating Instructions Manual page 47

1 When connected to the HXC-D70 HD Color Camera
Both the video format setting of the adaptor and HXC-D70 are synchronized with that
of the CCU (HXCU-FB70).
2 When connected to the PMW-500/350/320 Solid-State
Memory Camcorder
As PMW-500/350/320 supports video formats that the adaptor and CCU do not, the
video format setting of the camcorder is not synchronized with those of the CCU. Set
the video format of the camcorder according to the video format setting of the CCU.
Solid-State Memory Camcorder
PMW-500/350/320
Mode
HD mode
(HD SDI output)
SD mode
(SD SDI output)
Notes
• As the adaptor supports bidirectional transmission of HD digital signals, the
adaptor will not operate properly if the camcorder is in the SD mode. Also, when
an unsupported video format for the adaptor and CCU is selected or the SDI
OUTPUT setting is set to SD in the camcorder, the adaptor will not operate. For
information on the mode setting of the camcorder, refer to the operating
instructions of the camcorder.
• If video formats are inconsistent between the adaptor and camcorder, the POWER
lamp of the adaptor blinks at 2 Hz. For details, see "Error Messages" on page 48.
Video format
1920×1080/59.94i
1280×720/59.94P
1920×1080/50i
1280×720/50P
1920×1080/29.97PsF
1920×1080/25PsF
1920×1080/23.98PsF
720×486/59.94i
720×576/50i
Video format of the adaptor and
CCU
1920×1080/59.94i
1280×720/59.94P
1920×1080/50i
1280×720/50P
Do not support
Preparation and Setting 47