Sonim XP5560 BOLT 2 IS User Manual page 74

Receive call in
Always starts incoming PTT
background
calls in the background. By
default this option is disabled.
To set this option, select PTT
settings > Receive PTT call in
Background and select one of
the following options
• Enable - starts incoming
PTT call in background.
• Disable - starts incoming
PTT call in the main
screen.
Restore Restore PTT settings to factory
Defaults default settings.
Reject Voice Directs voice calls to voicemail
Call when PTT or sends busy signal when the
call in progress
user is in a PTT call. By default
this option is disabled.
To set this option, select PTT
settings > Reject voice call
when PTT call in progress
• Enable - rejects voice
call when the user is in an
active PTT call.
• Disable - incoming voice
call will barge in while on
a PTT call.
About
View the details of the PTT
application
Logout Logout of PTT session.
Managing PTT Calls
A user can make or receive a one-to-one call or one-to-
many call (group call). Calls can be dialled directly,from
the call history/home tab, from the PTT contact or group
tab or from the favourite tab.
The PTT contacts/groups will also be displayed in the
native phonebook and calls will appear in the call history.
You cannot call any recipient who is in Do not
disturb or Offline status.
If a call has no response from both initiator and
receiver, it is automatically disconnected after a
short time interval.
For one-to-one calls, the terminated call will be
considered by the client as a 'Missed call' if the
receiver never speaks during the entire call.
Direct PTT Calls
To dial a PTT call directly:
1. Enter the phone number of a contact using the dial
pad on the home screen.
2. Press and hold the PTT button.
Continue to hold the PTT button to speak.
3.
4. Release the PTT button when you finish speaking.
5. To end the call, press End Call (RSK) key or End
key.
74