Sonim XP5560 BOLT 2 IS User Manual page 42

You can access Bluetooth and data accounts.
Bluetooth
Bluetooth is a wireless connection that enables to
connect devices within short range, to exchange
information.
The Sonim XP5560 BOLT 2 IS is compliant with Bluetooth
specification BT 3.0 supporting the following profiles:
SPP, SAP, HFP, HSP, A2DP, AVRCP, DUN, PBAP, OPP, and
FTP. This device can send images and audio files using
Bluetooth connection.
There may be restrictions on using Bluetooth
technology in some locations. Check with your
local authorities or service providers.
Activate Bluetooth
Select Menu > Settings > Connectivity > Bluetooth >
Power > On. Use the Menu key to toggle between on
and off. When Bluetooth is activated, the Bluetooth icon
is displayed on the home screen.
Deactivate Bluetooth
Select Menu > Settings > Connectivity > Bluetooth >
Power > Off. Use the Menu key to toggle between on
and off.
Pairing Devices
Pairing with Bluetooth Devices of Version V2.0 and below
1. Select Menu > Settings > Connectivity >
Bluetooth > Search new device.
Select the device of your choice. Select Pair.
2.
3. Enter a passcode (for example, 0000). The same
passcode must be entered for the other device also.
4. Select OK.
5. When the other device accepts your request
the message Allow this device to connect
automatically? is displayed with options Yes and
No.
If you select Yes, the other device can send any file
via bluetooth without your confirmation.
If you select No, the other device cannot send a file
without your confirmation.
6. Select Yes/No to enable/disable automatic connect
in future.
7. When the other device rejects your request the
message Pairing Failed is displayed on the screen.
Pairing with Bluetooth Devices of Version V2.1 and
above
1. Select Menu > Settings > Connectivity >
Bluetooth > Search new device.
2. Select the device of your choice. Select Pair.
Passcode matched? message pops up while
pairing
Select OK.
3.
4. When the other device accepts your request
the message Allow this device to connect
automatically? is displayed with options Yes and
No.
5. Select Yes/No to enable/disable automatic connect
in future.
42