Sonim XP5560 BOLT 2 IS User Manual page 32

Call Timers
• To view the total time spent on the last call, select
Menu > Calls > Call history > Options > Advanced
> Call timers > Last call.
• To view the total time spent on outgoing calls, select
Menu > Calls > Call history > Options > Advanced
> Call timers > Dialled calls.
• To view the total time spent on incoming calls, select
Menu > Calls > Call history > Options > Advanced
> Call timers > Received calls.
• To reset the time of all calls, select Menu > Calls >
Call history > Options > Advanced > Call timers >
Reset all.
Call Settings
Auto Answer
Auto answer is enabled only if wired headset or Bluetooth
headset/carkit is connected to the phone. When auto
answer is activated, your incoming calls will automatically
be answered. Select Menu > Calls > Call settings >
Earphone auto answer > On.
Any key Answer
When enabled, you can press any key except
answer a call.
To activate this feature, select Menu > Calls > Call
settings > Any key answer > On.
During an incoming call, Reject (RSK) would reject the
call.
Long pressing (press and hold) the Power on/
off key
and not switch off the phone.
Call Waiting
When call waiting is enabled and the phone is in
conversation, the incoming number is displayed when
you receive a call.
1. To enable this feature, select Menu > Calls > Call
settings > Call waiting > Activate.
To cancel this feature, select Menu > Calls > Call
2.
settings > Call waiting > Deactivate. You will not
be prompted when you receive an incoming call
while your phone is busy. The caller will receive a
busy signal.
To verify the call waiting status, select Menu > Calls
3.
> Call settings > Call waiting > Query Status.
Caller ID
When you make a call, you can select whether or not to
display your id to the receiver.
Select Menu > calls > Call settings > Caller ID >
•
Set by network, to allow the network operator to
define the Caller ID settings.
to
Select Menu > Calls > Call settings > Caller ID >
•
Hide ID, to hide your id from the receiver.
• Select Menu > Calls > Call settings > Caller ID >
Send ID, to display the ID to the receiver.
during a call will only end the call
32