Led Colours - Parrot AR.Drone 2.0 User Manual

If the Pairing option is activated, the connection between the AR.Drone 2.0 and any other
Smartphone will not be possible.
To deactivate the Pairing
1. Launch AR.FreeFlight 2.0.
2. Tap the Piloting mode button and press
3. Press the button.
4. Deactivate the Pairing

LED colours

The LED lights (light emitting diodes) are the little red or green lights on the device. There are 2
types of LED on the AR.Drone 2.0:
- the 4 motor LEDs located close to the propellers
- the system LED located on the belly of the AR.Drone 2.0.
Motor LEDs
LED behaviour
The 4 LEDs are red
Each LED flashes red
one after the other
The 4 LEDS flash green
The 2 front LEDs are green
The 2 rear LEDs are red
option:
TAKE
option.
Meaning
Power is connected
A problem has occurred
The motors are starting up.
The AR.Drone 2.0 is currently taking off or landing.
The AR.Drone 2.0 is currently flying. These colours make it
easy for you to distinguish the front and the rear of the
AR.Drone 2.0 (when at a distance from the device).
OFF.
Getting Started 15