Tray (Sub) (Deck A); Chassis (Mold B) Section, Stocker Section And Slider (Selection) - Sony RCD-W222ES Service Manual

3-8. TRAY (SUB) (DECK A)

1 Rotating the pulley (LD), shift the slider (selection) in the direction of arrow A .
2 Rotating the pulley (mode) in the arrow direction, adjust the tray (sub) to be removed.
3 Rotating the pulley (LD), shift the slider (selection) in the direction of arrow B .
4 Rotating the pulley (mode) in the arrow direction, remove the tray (sub).
4

3-9. CHASSIS (MOLD B) SECTION, STOCKER SECTION AND SLIDER (SELECTION)

Note: On mounting parts, refer to pages 14 to 16.
6 Stocker
5 Two step screws
pulley (LD)
stocker section
tray (sub)
7 Two screws
(PTPWH M2.6)
section
pulley (LD)
4 Two step screws
A
2
B
8 Slider (selection)
9 Washer
0 Compression
1 Three screws
spring
(BVTP M2.6)
3 Gear (eject)
RCD-W222ES
slider (selection)
pulley (mode)
2 Chassis (mold B) section
Note: Rotating the pulley (LD),
shift the slider (selection)
to the left.
13