Troy-Bilt 208cc FLEX Operator's Manual page 11

5. Replace the fuel cap and tighten securely. Wipe up spilled
fuel before starting engine. If fuel is spilled DO NOT start
engine. Move machine away from area of spillage. Avoid
creating any source of ignition until fuel vapors are gone.
Figure 3-7
Tire Pressure
WARNING:
Under any circumstance do not exceed
manufacturer's recommended psi. Equal tire
pressure should be maintained at all times. Excessive
pressure when seating beads may cause tire/rim
assembly to burst with force sufficient to cause
serious injury. Refer to sidewall of tire for
recommended pressure.
The tires are over-inflated for shipping purposes. Check the tire
pressure before operating the FLEX™ Power Base. Refer to the tire
side wall for tire manufacturer's recommended psi and deflate
(or inflate) the tires as necessary. Use a manual pump or portable
electric tire inflator to prevent over-inflation. NEVER USE AN AIR
COMPRESSOR!
Note: Equal tire pressure is to be maintained at all times for
performance purposes.
S 3 — A & S -U
ection SSembly et
11
p