Datashur Layout; Led Indicators And Their Actions; How To Change The User Pin - iStorage datAshur User Manual

1. datAshur Layout

2. LED indicators and their actions

When all LEDs are OFF the datAshur is locked
and secure.
blink Drive is unlocked in User Mode
Drive is unlocked in Admin Mode
double
blink
solid Drive is connected to a powered
USB port
solid Drive is connected to host computer
and is idle
blink Data exchange with host computer

3. How to change the User PIN

Unless otherwise noted, all steps are performed when datAshur is NOT connected to a computer.
Caution: The datAshur is shipped with a default User PIN of
and although it can be used straight out of the box with the default PIN, for security reasons, we
highly recommend that a new User PIN be created immediately by following instructions under
section 3 "How to change User PIN".
If you forget your User PIN and no Admin PIN exists, or you forget both PINs, all data will be inaccessible.
.
.
. .
LED, stand by with the datAshur locked
Lock
LED, datAshur is unlocked when flashing
Unlock
Keypad
.
Key Button, used to activate the datAshur and to
enter PIN codes
.
LED, when on, the datAshur is connected to the
Blue
computer. when flashing data is being transferred
Keyring, unscrew to add to key ring.
blink
solid
blink
together
double
blink
illuminate
together
blink
alternately
www.istorage-uk.com
Drive is locked and secure
No User PIN
Accepting User PIN
setting / changing the PIN
Accepting Admin PIN
setting / changing the PIN
Accepting new PIN
Error
1-1-2-2-3-3-4-4
#5