iStorage datAshur User Manual page 13

3. The computer should notify the user with the following message:
4. Proceed by clicking on Format disk.
Select FAT32 or NTFS depending on your needs, enter a Volume Label and click Start.
5. Click OK to continue with formatting the drive.
Warning: This procedure will erase ALL data on the drive.
6. The procedure will finish formatting the drive and confirm that formatting has been completed.
While the datAshur is formatting the
Once finished, the BLUE LED becomes solid and your datAshur is ready for use.
BLUE LED will be flashing.
www.istorage-uk.com www.istorage-uk.com
#13 #13