Hunter Type 2 Models Owner's Manual And Installation Manual page 12

Steps 8-5 – 8-6
Lower Switch
Housing
Plug
Connector
Detail
Housing
Assembly Screw
8 • Installing the Light Kit (Continued)
8-5. To attach the lower switch housing, connect the upper plug
connector from the motor to the lower plug connector in the
lower switch housing assembly.
Note: Both plug connectors are polarized and will only fit together
one way. Make sure the connectors are properly aligned before
connecting them. Incorrect connection could cause improper
Plug
operation and damage to the product.
Connector
8-6. Place the lower switch housing assembly over the upper switch
housing. Align the side screw holes in the upper and lower switch
housings. Attach the lower switch housing to the upper switch
housing with three housing assembly screws.
8-7. Insert each glass shade in a shade cup. Install and tighten the three
thumb screws. Do not overtighten
8-8. Install medium base incandescent light bulbs (40 watt maximum
each).
Steps 8-7 – 8-8
12
42619-01 • 04/24/12 • Hunter Fan Company
Thumbscrews
Glass
Shade
Bulb