Table of Contents
Advertisement
SECTION 2
Gettim Started
Table
2-1.
Fuse Replacement
mi
NCSTE: Fuses are 5 x 20mm and have
25OV, normal blow ratings.
2.4
HANDLING
PRECAUTIONS
A flat keyboard coated with a polyester film forms the
control panel surface of the Model 3930A. Be careful not
todamagethekeyboardsurfacebycuttingitwithasharp
instrument
or touching it with a hot object.
When the panel or case becomes dirty, clean it with a soft
cloth.
If the panel or cake is too dirty for cleaning with a
dry cloth, dampen the cloth in mild detergent, and wipe
the panel or case with the damp cloth. Never use solvents
such as thinner
or benzene, or chemical
dust
cloths to
avoid damaging the case or front panel surfaces.
2.5
BASIC OPERATION
The following
paragraphs summarize front panel operat-
ing controls, give typical test connections,
and discuss
typical operating examples for the Model 3930A.
2.5.1
Front Panel Summary
Figure 2-l summarizes
each front panel feature. For de-
tailed information
on each operating feature, refer to Sec-
tion 3.
2.5.2
Typical
Test Connections
Figure 2-2 shows typical tests comections
behveen the
Mode13930A mainsynthesizerand
a DLT. Note that SO<>
characteristic
impedance cables such as the Model 7051
should be used for output connections.
2-3
Advertisement
Table of Contents
