Service Note; Power Supply During Repairs; Setting The "Forced Power On" Mode - Sony DCR-SR50E Service Manual

1-1. POWER SUPPLY DURING REPAIRS

In this unit, about 10 seconds after power is supplied to the battery terminal using the regulated power supply (8.4V), the power is shut off so
that the unit cannot operate.
These following method is available to prevent this.
Method:
Use the AC power adaptor (AC-L25A/L25B).

1-2. SETTING THE "FORCED POWER ON" MODE

It is possible to turn on power by adjustment remote commander (RM-95 or NEW LANC JIG).
Operate the camcorder using the adjustment remote commander.
1-2-1. Setting the "Forced Movie Power ON" Mode
1) Select page: 0, address: 01, and set data:01.
2) Select page: A, address: 10, set data:01 and press the "PAUSE (Write)" button of the adjustment remote commander.
1-2-2. Setting the "Forced Play/Edit Power ON" Mode
1) Select page: 0, address: 01, and set data:01.
2) Select page: A, address: 10, set data:02 and press the "PAUSE (Write)" button of the adjustment remote commander.
1-2-3. Exiting the "Forced Power ON" Mode
1) Select page: 0, address: 01, and set data:01.
2) Select page: A, address: 10, set data:00 and press the "PAUSE (Write)" button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
DCR-SR50E/SR60/SR60E/SR70E/SR80/SR80E_L2

1. SERVICE NOTE

1-1
ENGLISH JAPANESE
ENGLISH JAPANESE