3 Connectors
The locations of all the connectors described in this chapter are shown in "1.4.1 Connectors
and Component Locations".
"Key" stands for foolproof feature; "NC" stands for unused.
3.1 Power Connectors (J1, J14, J11)
The main power supply connection is obtained using the 24-pin connector.
The processor power supply connection is obtained using the 8-pin connector.
The system memory power supply connection is obtained using the 6-pin connector.
3.1.1 Main Power Connector (J1)
The 24-pin main power connector and the pin definition are shown below:
1230B0059901
Figure 3-1 Main Power Connector
Connectors
3-1