To Remove A Dimm; To Install A Dimm - ReliOn R1700 User Manual

Reminder
Before you remove or install any DIMMs, please follow the steps below:
Step 1: Make sure the server is not turned on or connected to the AC power. To power off
the server, see "2.1.1 Power Off" in the System User Manual.
Step 2: Remove the chassis cover. To remove the cover, see "2.2 Chassis Cover" in the
System User Manual.

2.5.1 To remove a DIMM

Unlock a DIMM socket by pressing the retaining clips outward. This action releases the
module and partially lifts it out of the socket.
Lift out the DIMM.

2.5.2 To install a DIMM

Unlock a DIMM socket by pressing the retaining clips outward.
1230B0059901
Figure 2-14 Lifting the DIMM out of the Socket
Figure 2-15 Pressing the Retaining Clips Outward
Hardware Operations
2-14