Remote Vehicle Start - GMC 2016 Yukon User Manual

1. With the key removed, insert a
flat, thin object in the center of
the transmitter to separate and
remove the back cover.
2. Lift the battery with a flat
object.
3. Remove the battery.
4. Insert the new battery, positive
side toward the back cover.
Replace with a CR2032 or
equivalent battery.
5. Push together the transmitter.

Remote Vehicle Start

If equipped with the remote start
feature, the climate control system
will come on when the vehicle is
started remotely depending on the
outside temperature.
The rear defog and heated and
cooled seats, if equipped, may also
come on. See Heated and Cooled
Front Seats 0 65 and Vehicle
Personalization 0 160.
Laws in some communities may
restrict the use of remote starters.
Check local regulations for any
requirements on remote starting of
vehicles.
Do not use remote start if the
vehicle is low on fuel.
The vehicle cannot be remote
started if:
The key is in the ignition (Key
Access) or the transmitter is in
the vehicle (Keyless Access).
The hood is not closed.
There is an emission control
system malfunction and the
malfunction indicator lamp is on.
Keys, Doors, and Windows
The engine will turn off during a
remote vehicle start if:
The coolant temperature gets
too high.
The oil pressure gets low.
The RKE transmitter range may be
reduced while the vehicle is running.
Other conditions can affect the
performance of the transmitter. See
Remote Keyless Entry (RKE)
System 0 31 or Vehicle
Personalization 0 160.
Starting the Engine Using Remote
Start
1. Press and release
2. Immediately press and hold
until the turn signal lamps flash
or for at least four seconds.
When the vehicle starts, the
parking lamps will turn on. The
doors will be locked and the
climate control system may
come on.
39
.