Lamp Messages; Object Detection System; Messages - GMC 2016 Yukon User Manual

See Starting the Vehicle with a Low
Transmitter Battery under Remote
Keyless Entry (RKE) System
Operation (Key Access) 0 31 or
Remote Keyless Entry (RKE)
System Operation 0 33.
NO REMOTE DETECTED
This message displays when the
transmitter battery may be weak.
See Starting the Vehicle with a Low
Transmitter Battery under Remote
Keyless Entry (RKE) System
Operation (Key Access) 0 31 or
Remote Keyless Entry (RKE)
System Operation 0 33.
NO REMOTE DETECTED
PRESS BRAKE TO RESTART
This message displays when
attempting to turn off the vehicle
and the RKE transmitter is no longer
detected. Restarting is allowed
without the RKE transmitter for
five minutes. Press the brake pedal
to restart the vehicle.
NUMBER OF KEYS
PROGRAMMED
This message displays when
programming new keys to the
vehicle.
REMOTE LEFT IN VEHICLE
This message displays when
leaving the vehicle with the RKE
transmitter still inside.
REPLACE BATTERY IN
REMOTE KEY
This message displays when the
battery in the RKE transmitter needs
to be replaced.

Lamp Messages

TURN SIGNAL ON
This message displays and a chime
sounds if a turn signal is left on for
1.2 km (0.75 mi). Move the turn
signal lever to the off position.
Instruments and Controls

Object Detection System

Messages

AUTOMATIC COLLISION
PREP OFF
This message displays when the
Front Automatic Braking (FAB)
System has been turned off. See
Front Automatic Braking (FAB)
System 0 246.
AUTOMATIC COLLISION PREP
REDUCED
This message displays when the
Front Automatic Braking (FAB)
System has been set to the Alert
setting. This setting disables most
FAB functions. Some last-second
automatic braking capability is still
provided with the Alert setting, but
braking is less likely to occur. See
Front Automatic Braking (FAB)
System 0 246.
AUTOMATIC COLLISION PREP
UNAVAILABLE
This message displays when the
Front Automatic Braking (FAB)
System has been unavailable for
153