Changhong Electric LED40D1100ISX Operation Manual page 26

Menu Operation
PVR Function Operation Instruction
How to use PVR function?
Preparing
1. Plug USB flash drive or USB hard disk into USB slot on the left hand side of the TV
set.
NOTE:
• USB disk needs should have capacity at least 512MB.
• USB device must support USB 2.0 high-speed specification.
2. Press the HOME/SOURCE button to display the Smart Home menu. Press the
▲/▼ button to select DTV source, the PVR function can only be used in DTV mode.
3. Then press the MENU button on the remote to bring the main menu up, press the
▲/▼/◄/► button to highlight Setting menu, and then press the OK button.
4. Press ▲/▼ button to highlight PVR File System (In DTV mode), then press the
OK button to go into submenu.
Setting
– Select Disk: Select a disk used for PVR.
NOTE:
• Some models have two USB input and several disk
can be used when two USB devices are plugged in.
– Time Shift Size: You can select the memory size for
Time Shift function.
– Format Start: Format USB disk.
NOTE:
• Before formatting, please back up all important files.
• During the device formatting, do not disconnect the
device or turn off the power. If your USB device can't be
formatted or fail to be checked by the system, it means
the device isn't compatible with the TV or is damaged.
The larger USB device will take longer time to format
please be patient until the formatting finishes.
– Speed Check: Press the OK/► button to check the
speed of the storage device.
23
PVR File System
Select Disk
< 512M
Time Shift Size
Format Start
Adjust
Ack BACK
OK
>
>
>
Back