Adaptec AUA-3100LP Hardware Installation Manual page 2

Hide thumbs Also See for AUA-3100LP:
Table of Contents

Advertisement

I
NTRODUCTION
The Adaptec USB2connect Adapter Card (AUA-3100LP) is a
Universal Serial Bus (USB) host adapter for PC-compatible or
Macintosh computers that provides connectivity to USB 1.1 and
USB 2.0 devices. USB 2.0, or Enhanced Host Control Interface
(EHCI), is the fastest USB standard, capable of transferring data
at up to 480 megabits per second. USB 2.0 is compatible with
USB 1.1, Open Host Controller Interface (OHCI) devices. This
adapter is a 32-bit, 33-MHz PCI card and will work in either a
32-bit or 64-bit, 33- or 66-MHz, 3.3- or 5-volt compatible slot.
Refer to the Readme file on the CD for operating system support.
The USB2connect card is shown below:
External
Connectors
This installation guide explains how to install the USB2connect
card into your computer.
N
OTE
USB2connect, see the User's and Installation Guide located on
the CD included in this kit.
For information on installing the drivers for the
1
Internal
Connector

Advertisement

Table of Contents
loading

Table of Contents