Assembly - Shark Rotator NV680UKT Instruction Manual

ASSEMBLY

STEP 1
1 Place the selected floor nozzle on the floor and insert
the wand.
2 Insert the handle into the wand.
STEP 2
3 Slide the pod onto the wand.
4 Slide the hose clip into the notch at the back of the
wand.
STEP 3 STEP 4
0 8 0 0 8 6 2 0 4 5 3
STEP 5
5 Insert the 2-in-1 crevice tool and articulated upholstery
tool into the accessory posts as shown.
TIP: For quick cord access, rotate upper hook down and
remove cord. Rotate back for cord storage.
4