Ford 2016 EXPLORER Owner's Manual page 468

Note: To prevent window fogging, you cannot select recirculated air when MAX
Defrost is on.
L Driver settings:
Touch the + or – to increase or decrease the air temperature on the driver side
of the vehicle.
Touch the heated seat icon to switch the heated seat off and on (if equipped).
Touch the climate-controlled seat icon to switch the climate-controlled seat
off and on (if equipped).
Touch MyTemp to select your preset temperature setpoint. Touch and hold
MyTemp to save a new preset temperature setpoint.
Touch the heated steering wheel icon to switch the heated steering wheel on
and off (if equipped).
Note: If your vehicle is equipped with a
wood-trimmed steering wheel, it does not
heat between the 10 o'clock and 2 o'clock
positions.
Climate Control Voice Commands
Note: Depending on the current climate
control settings, the fan speed may
automatically go down while issuing voice
commands or while making and receiving
phone calls via SYNC to reduce the amount
of background noise in the vehicle. The fan
speed automatically returns to normal
operation once the voice session ends. You
can adjust fan speed normally during a voice
session by pressing the fan buttons (or
turning the fan knob) to increase or
decrease the fan speed to the desired
setting.
Climate On
Climate Off
Set temperature
Explorer (TUB), enUSA, First Printing
MyFord Touch
Voice commands
Adjust the temperature to between 15.0 - 30.0°C or
465
(If Equipped)
To disable this automatic fan speed
reduction feature during voice sessions,
press and hold the climate control AC and
Recirc buttons simultaneously, release and
then increase fan speed within 2 seconds.
To re-enable this feature, repeat this
sequence.
Press the voice button on the
steering wheel controls. When
E142599 prompted, say any of the
following or a similar command:
59 - 86°F.