Assembling And Mounting The Telescopic Pole; Assembly Instructions - Salton SF-407 Instruction Manual

ASSEMBLY INSTRUCTIONS

Assembling and Mounting the Telescopic Pole

The Telescopic Pole is made up of 4 sections.
TOP (Section 1)
MIDDLE-TOP (Section 2)
MIDDLE-BOTTOM (Section 3)
BOTTOM (Section 4)
Sections 1, 2 and 3 are adjustable in length. By using the three extension
locks, these sections may be expanded or collapsed in order to achieve the
desired length. See the 'Adjusting the Telescopic Pole' section below.
Adjusting the Telescopic Pole
1. Release the extension lock directly below Section 1 by swinging the
hinge outward as shown. Section 1 can now be extended or retracted.
2. Close the hinge.
3. Repeat the same steps for Sections 2 and 3 of the Telescopic Pole.
NOTE: It is recommended to extend the Telescopic Pole to its full height
during steamer operation so there is a free flow of steam through the Hose.
5