Our hoods are equipped with variable speed control blowers. These units will not function with a single speed ventilator. All Viking Range ventilator kits are designed specifically for use with Viking Range hoods.
Warnings WARNING WARNING To reduce the risk of fire, electric shock, or injury to To reduce the risk of injury to persons in the event persons, observe the following: of a rangetop grease fire, observe the following. (Based on “Kitchen Firesafety Tips,” published by •...
Planning Information Proper installation of ducting is extremely 300 or 600 CFM important to ensure maximum performance from Roof Cap single blower any ventilation product. interior-power 7” round duct typical ductwork • All CFMs are based on tests at 0.1 static pressure: without applying static pressure, CFM would be greatly overstated.
Installation ( 4 . 6 ” 1-1/2” x 3/4” Slot for (3.8 cm) x ( 1.9 cm) Wood strip 5/16” 5/16” wood strip Nut driver Nut driver Measure down 1-13/16 (4.6 cm) from desired height of Use additional mounting screws to secure hood to hood and secure 1-1/2”...
Duct Cover Option Measure distance from ceiling to canopy. Slide the duct cover in place and fasten from inside canopy using the sheet metal screws provided. To install ventillation kit refer to ventillation kit installation instructions.
• Name of dealer from whom purchased Clearly describe the problem that you are having. If you are unable to obtain the name of an authorized service agency, or if you continue to have service problems, contact Viking Range, LLC at 1-888-(845- 4641), or write to:...
Page 12
Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-(845-4641) or visit our web site at vikingrange.com in the US or brigade.ca in Canada F21448A EN (090115)
Need help?
Do you have a question about the TVWH360 and is the answer not in the manual?
Questions and answers