Dmx Personality; Dmx Controller - Iluminarc Colorist POD 18Qa User Manual

If you have not
configured the
DMX starting
address and
DMX personality for each
product, they will all use
their default values. This
means that all products
will operate in unison.
Colorist™ Pod 18Qa User Manual Rev. 2

DMX Personality

The Colorist™ Pod 18Qa uses the standard DMX data connection for its 3 DMX personalities
as per the table below. Refer to the
personalities. Refer to the
to work in these personalities. The
regarding the DMX personalities.
DMX Personality
4-CH
6-CH
10CH

DMX Controller

The Colorist™ Pod 18Qa can work with a standard DMX controller. The channel assignments
will depend on the chosen DMX personality (see the corresponding
the DMX address assigned to each product (see the
The figure below illustrates how to connect the DMX controller to the Colorist™ Pod 18Qa.
Introduction
Operation chapter to learn how to configure the Colorist™ Pod 18Qa
DMX Values
Programming
chapter for a brief description of these
section provides detailed information
DMX Address
509
507
503
Menu Map
section).
Installation
section) and
9