Pointing Device - Toshiba Portege M930 Series User Manual

Problem
You cannot write to
a memory media
card
You cannot read a
file

Pointing device

If you are using a USB mouse, you should also refer to both the
mouse
mouse.
AccuPoint
Problem
The AccuPoint does
not work.
On-screen pointer
does not respond to
pointing device
operation
The on-screen
pointer moves too
fast or too slow
User's Manual
Procedure
Remove the memory media card from the
computer and check to ensure that it is not write
protected.
Check to ensure the required file is actually on the
memory media card that is inserted into the
computer.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
section in this chapter, and the documentation supplied with your
Procedure
Check the Device Select settings.
Click Start -> Control Panel -> Hardware and
Sound -> Mouse.
Pressing FN + F9 to enable.
In this instance the system might be busy - Try to
move again after waiting a short while.
In this instance, you should initially try changing
the speed setting within the Mouse Control utility.
1.
2.
3.
If you are still unable to resolve the problem,
contact TOSHIBA Support.
To access this utility, click Start -> Control
Panel -> Hardware and Sound -> Mouse.
Within the Mouse Properties window, click the
Pointer Options tab.
Set the pointer speed as required and click
OK.
PORTÉGÉ M930
USB
6-8